NEUTRINO 3 CHANNEL COLORCUBE HYPEX NC250MP 1x250W 4OHM(1x150W 8OHM) + NC122MP 2x125W 4OHM(2x75W 8OHM), 3xXLR OR 3xRCA, TRIGGER
Availability: available
Case is available in different colours: Black, Red, White, Gray. Dimension of case: wide 220mm, depth 310mm, height 140mm without feet.
Amplifier housing is made of 10mm aluminum and painted with best quality automotive matte paint
Any color from the RAL color chart( www.ralcolor.com ) can be chosen with additional charge of 120 EUR
Additional specifications for NEUTRINO 3 CHANNEL COLORCUBE HYPEX NC250MP 1x250W 4OHM(1x150W 8OHM) + NC122MP 2x125W 4OHM(2x75W 8OHM), 3xXLR OR 3xRCA, TRIGGER
Amplifier housing is made of 10mm aluminum and painted with best quality automotive matte paint
Any color from the RAL color chart( www.ralcolor.com ) can be chosen with additional charge of 120 EUR
OPTIONS EXPLANATION:
XLR+RCA, trigger
XLR+RCA..........this means that there are two female
input connectors on the rear panel of amplifer: XLR and RCA. There
is a 2-way micro switch between them to choose if you want to use
XLR(balanced) or RCA(unbalanced) input.
Trigger........... this means that there is 2-way switch on the rear panel close to 230V socket which select always on power supply or power on with trigger voltage of 12V from another source or preamplifier.
INPUT SENSITIVITY, trigger
INPUT SENSITIVITY........this means that there are two
input connectors on rear panel of amplifer: XLR and RCA. There is
a 2-way micro switch between them to choose whether you want to
use XLR(balanced) or RCA(unbalanced) input. In addition, there is
a 10-way micro switch with 10 positions for max input voltage
selection. With different positions of 10-way switch we
change gain of Hypex amplifier input buffer. In this way, the
input sensitivity circuit will have absolutely no influence on
sound. Different brands of preamplifiers have different maximum
output voltage. Preamplifiers with different maximum output
voltages: 2V, 3V, 4.0V, 4.2V, 4.5V, 4.8V, 5.0V, 5.2V, 6.0V, 7.8V,
could be used.
Adjustment of maximum output voltage from preamp with maximum input voltage of amplifier is important to prevent next negative scenarios:
- in case higher maximum voltage from preamp compared to maximum
input voltage of amplifier, clipping problem will appear in
amplifier.
- in case of smaller preamp maximum output voltage compared to amplifier maximum input voltage, amplifier will not work in optimal power range, so higher THD+N and IMD will appear. THD+N and IMD are usually lower for higher power.
Trigger........... this means that there is 2-way switch on the rear panel close to 230V socket which select always on power supply or power on with trigger voltage of 5-12V from another source or preamplifier.
XLR+RCA, auto on/off
XLR+RCA..........this means that there are two female input connectors on the rear panel of amplifer: XLR and RCA. There is a 2-way micro switch between them to choose if you want to use XLR(balanced) or RCA(unbalanced) input.
Auto on/off.....this means that there is 3-way micro switch on the rear panel, close to 230V socket with which you can select 1) always on power supply, 2) power on with trigger 5-12V through 3.5mm connector or 3) auto power turn on when audio signal appears in the input and auto turn off when audio signal disappears at the input.
INPUT SENSITIVITY, auto on/off
INPUT SENSITIVITY........this means that there are two
input connectors on rear panel of amplifer: XLR and RCA. There is
a 2-way micro switch between them to choose whether you want to
use XLR(balanced) or RCA(unbalanced) input. In addition, there is
a 10-way micro switch with 10 positions for max input voltage
selection. With different positions of 10-way switch we
change gain of Hypex amplifier input buffer. In this way, the
input sensitivity circuit will have absolutely no influence on
sound. Different brands of preamplifiers have different maximum
output voltage. Preamplifiers with different maximum output
voltages: 2V, 3V, 4.0V, 4.2V, 4.5V, 4.8V, 5.0V, 5.2V, 6.0V, 7.8V,
could be used.
Adjustment of maximum output voltage from preamp with maximum input voltage of amplifier is important to prevent next negative scenarios:
- in case higher maximum voltage from preamp compared to maximum
input voltage of amplifier, clipping problem will appear in
amplifier.
- in case of smaller preamp maximum output voltage compared to
amplifier maximum input voltage, amplifier will not work in
optimal power range, so higher THD+N and IMD will appear. THD+N
and IMD are usually lower for higher power.
Auto on/off.....this means that there is 3-way micro switch on the rear panel, close to 230V socket with which you can select 1) always on power supply, 2) power on with trigger 5-12V through 3.5mm connector or 3) auto power turn on when audio signal appears in the input and auto turn off when audio signal disappears at the input.
Specifications for NEUTRINO 3 CHANNEL COLORCUBE HYPEX NC250MP 1x250W 4OHM(1x150W 8OHM) + NC122MP 2x125W 4OHM(2x75W 8OHM), 3xXLR OR 3xRCA, TRIGGER
Options | XLR+RCA, trigger or INPUT SENSITIVITY, trigger or XLR+RCA, auto on/off or INPUT SENSITIVITY, auto on/off |
Colour | Black or Red or White or Gray |
Once the user has seen at least one product this snippet will be visible.